Primrose Awnings
Half Cassette Manual & Electric Instructions
Contents for 2.5m, 3m Awnings
4 x Expansion bolts (2 per bracket)**
2 x Wall brackets
1 x Awning
Contents for 3.5m, 4m Awnings
6 x Expansion bolts (2 per bracket)**
3 x Wall brackets
1 x Awning
Contents for 4.5m Awnings
8 x Expansion bolts (2 per bracket)**
4 x Wall brackets
1 x Awning
Optional Controls
(Depends which set was purchased)
Set A (Remote control kit)
1 x Remote control receiver box
2 x Remote hand-held zappers
1 x 5m electrical wire (3 core) to connect
the remote reciever box to the mains
Set B (Indoor wall switch)
1 x Wall Switch
Set C (Wind, sun, rain sensor)
1 x Remote control receiver box
2 x Remote hand-held zappers
1 x Wind, rain and sun sensor
Primrose Awning Installation Instructions
1
WARNING
We recommend that two people are required
to lift the awning into place.
You may wish to consult a qualified electrician
before installing electrical awnings.
The awning and frame may be supplied with a
plastic wrapper. This should be removed prior
to use.
Plastic bags can be dangerous to children and
babies. Keep out of the reach of babies and
children to avoid the risk of suffocation.
**The expansion bolts supplied are for reinforced
concrete or brick walls. The awnings may be installed
on wooden walls if the wall is sufficiently strong.
Use appropriate screw-threaded or coach bolts.
Hammer drill
14mm masonry drill bit
Chalk or pencil to mark
Laser level or long spirit level
Metric socket spanner set
Adjustable spanner
Tools recommended
