it again, then switch on the power supply again.
3. The machine has slow or quick reversion function, and it can be used in blending the
materials. When taking out the paste, reversion function can’t be used in case of breaking the
paste.
4. At any times, if happens some accidents, press “Emergency Button” to stop the machine
quickly to prevent any damage. The machine can be started again after finding out the reasons.
Notes
1. The mixer must have good protective grounding.
2. Don’t operate the mixer beyond the required quantity. When the quantity of water is
below 55%, please reduce the flour.
3. If use ice, please use shivers.
4. Do not put the hand into the bowl when operating the mixer.
Maintenance
Take out the paste after mixing; wipe the inside of bowl, newel and pole with clean water
and cloth. And move the unwanted materials above the bowl with clean cloth. Do not wash the
below area of the machine.
1. Wipe the panel with clean cloth with litter water; do not use toluene, gas .ect volatile
cleaner to clean the panel.
2. Do not use nail or other hard things to press the button. Do not wash the panel and switch
with water in case of electric shock.
3. Make sure the machine works in a stable position, if it has some shakes, then adjust the
adjustable foot to make the machine in stable.
4. Put the butter into every butter hole in the bearing three months a time.
Easy trouble and solution
1. The machine can’t start up:
①
Check the power supply, whether lose phase or not.
②
Check the fuse, if burnt, please replace it.
③
Switch, emergency button and other buttons are in close or open.
2. The machine can’t work normally, the belt often became flexible and slip, please adjust the
belt.
