Verify clock signal at install location
If you completed the initial set up procedure at a location different from the clock's final installation location, you must verify the
clock is receiving a signal from the Transmitter at its installation location.
1. Press and release the button twice and hang the clock in place.
If the clock beeps every second, then the signal from the Transmitter is strong.
If the clock beeps every few seconds, the signal from the Transmitter is marginal.
Clocks work in a marginal signal area, but may have a battery life shorter than five years. Estimated battery life in a marginal
area is four years.
To reset the initial setup, simply remove the batteries then repeat the set up procedure.
18
XR Analog Clock Install Guide
