Me ssag e Bo ard 's d i sp l ay i s b l ank
The Message Board's display may be blank due to its power status or its Ethernet network connection.
Possible solutions
1.
Verify its power cord connection from the Message Board to the 3-prong outlet.
2.
Perform a power-reset: power off the Message Board, unplug the network cable, power back on, and plug the network cable back
in. Verify the Message Board's "amber-network light" is flashing, which indicates network activity. Wait up to 20 to 30 seconds for
the Message Board to successfully cycle through its power-reset.
3.
It may take up to five (5) minutes for the Message Board to connect to network. Upon its network connection, it synchronizes its time
with its NTP time source(s) and downloads its OneVue configuration setting updates.
13
Smart-Comm™ Message Board Display Settings User Guide
