Install and operation overview: Sync Bluetooth Personal Series LCD Clock
About Sync Bluetooth devices
Sync Bluetooth clocks and repeaters are designed to provide ease of installation, requiring no end user configuration,
simply take-out-of the box and install. The only operation dependency is its connection to an available Sync Bluetooth
mesh network.
• Sync Bluetooth devices are equipped with a Bluetooth Low Energy (BLE) Wireless Technology radio component, that
allows it to establish a wireless connection to a Sync Bluetooth mesh network.
• Each device is identified by a unique Device ID, allowing it to receive its unique settings managed in OneVue, and also
authenticate and connect to the mesh network.
• A Bridge is the only system device that connects to your facility’s Ethernet or Wi-Fi network. Upon its network
connection, it connects to a NTP Server to receive UTC time and checks-in to OneVue to send Sync Bluetooth device
statuses and download setting updates.
About Add a Clock mode
Upon first-power up at its installation location, a clock and repeater enters Add a Clock mode as described below.
1. Once powered on at its installation location, the device continuously searches for an available Sync Bluetooth
mesh network.
It may take up to 15 minutes for a device to authenticate and connect to an available mesh network. We
recommend to continue installing additional devices, while other devices establish their connection to the mesh
network.
2. Once a device has authenticated with the mesh network, it establishes a communication path either to another
Sync Bluetooth device or directly to a Bridge available within the mesh network.
3. Once connected, the device receives the New Clock Time Zone and sets its time. For an analog clock, its hands
perform one full revolution past 12:00 and then sets its time.
• During its first connection to the mesh network, its unique Device ID is added to the mesh network.
• If a Bridge is in 8-hour deployment mode, within 30 minutes of receiving a new Device ID, the Bridge connects to
your facility's network and sends the new Device ID to OneVue. The new device is added to your OneVue
account.
• If a Bridge is not in 8-hour deployment mode, the new device is added to your OneVue account within 24 hours to
7 days.
4. When the Bridge connects to OneVue, the new device default settings are downloaded to the Bridge.
5. Upon its next connection to the mesh network, the Bridge automatically sends updated device settings received for
each device based on their Device ID.
In summary, from the time a clock or repeater device is first powered on at its install Location and connects to the
mesh network, it receives and sets its time within 15 minutes. If a Bridge is in 8-hour deployment mode, a new device is
Page 4
