Preview all 7 steps before beginning. Should any portion of these instructions be unclear, contact a qualified contractor, handyman or call us
direct at 800-582-9595 for assistance. Do not attempt to install this Vantage Point television ceiling mount if you have any doubts as to its proper
installation. CAUTION- This Television Ceiling Mount is intended for use only with maximum weight indicated. Use with heavier than the maximum
weights indicated may result in instability causing possible injury. Use of this product for any other purpose unless specified by Vantage Point
Products is not recommended. Think safety first!
Δ
INDICATES TO NOTE CAUTION, WHICH IF NEGLECTED MAY RESULT IN AN IMPROPER OR UNSTABLE ASSEMBLY.
Before placing the television on the ceiling mount, slide the safety strap (K)
through both front slots on the platform (E), as shown. Have the safety strap
(K) hang down from the platform ready for the television placement. Next, with
adequate assistance place the television on the ceiling mount and secure the
safety strap (K) immediately, as shown.
Δ
Deter tampering with the safety strap (K) by locating the strap buckle on the
top of the television.
J
SPECIFICATIONS and RATINGS
TV SIZE
MODEL # IN BLACK
MODEL # IN WHITE
MAX. LOAD
LISTED
13" – 17"
PTC13-B
PTC13-W
60 LBS.
YES*
19" – 21"
PTC20-B
PTC20-W
60 LBS.
YES*
25" – 27"
PTC26-B
PTC26-W
80 LBS.
YES*
* TESTED TO 4 TIMES MAX. LOAD RATING By Underwriters Laboratories Inc.®
K
D
C
A
B
F
B
H
I
G
E
A
B
F
I
Installed at
factory
Installed
at factory
Step 7
Television
Ceiling Mount Instructions
For Models PTC13 and PTC20
Vantage Point Products Corp.
• P.O. Box 2485, Santa Fe Springs, CA 90670
U.S.A. Tel: 562.946.1718 • Canada Tel: 905.607.9994 • Web Site: www.vanptc.com • Email: [email protected]
FIG.
ITEM
DESCRIPTION
QTY
A
Platform Bolt
3/8”-16 x 2-1/2” custom hex head bolt 2
B Indexing Washer 3/8” custom indexing flat washer
4
C
Ceiling Plate
Steel ceiling plate
1
D
Plastic Cover
Plastic rounded ceiling plate cover
1
E
Platform
Steel
platform
1
F
Bearing Ring
3” plastic bearing ring
2
(installed at factory)
G
Steel Frame
“C” shaped tubular steel arm
1
H
Flange Nut
3/8”-16 serrated flange nut
2
I
Dome Cap
3” plastic Dome cap
2
J
Lag Screw
#14 x 2-1/2” hex head lag screws
4
K
Safety Strap
1-1/2” polypropylene strap
1
All VANTAGE POINT products are manufactured to ensure superior quality, performance and durability for a lifetime of use. Warranty covers the product to be free
from defects in the materials and workmanship under normal and reasonable use. Vantage Point Products will repair or replace, at our option, any product which
proves to be defective upon our inspection. This warranty will not apply to products which have been lost or damaged by misuse, abuse or accident, altered or
repaired in any way by any person or firm other than us, used in violation of instructions or an incorrect assembly nor used in a manner other than specified by
us. The warranty is nontransferable to a new owner and may require proof of purchase. All claims must be directly handled with Vantage Point Products Corp.
6i04-07/03
B
H
Tools
Required