Primes Cube L1, Руководство по эксплуатации

Страница: 36 / 48

35,0(6
Cube L1
36
Revision 01/2019 EN
14.5.2 Displays in the toolbench Cube series
Press the Load measurements button in the device control. The last 30 measurements
are readout from the Cube L1 and the measuring values are displayed in the left table.
Click on the arrow in the column Use to transfer the measuring values to the analysis
table. If required, you can assign target values to the measuring values in the analysis
table. By clicking on the gear symbol
you can save and load these.
Analysis table Measuring values
The two graphs below the table show the measurements marked in the analysis table
with a check.
By clicking on the gear symbol you can adjust the displayed parameters in both
graphs.
The left graph is the standard graph with the Cube L1 adapted parameter selection:
Index (number of measurement) and power in W.
In the right graph, select both parameters shown on the axes from the parameter list.
Press the CTRL key and highlight the first parameter for the x-axis (gray background)
and then the second parameter for the y-axis.