PRIMERGY PG-RD101, Руководство пользователя

Страница: 55 / 76

2 How to Install and Introduce this Product to a Server
55
E
6
Check that booting from this product is disabled, and the FDD unit
(USB) is prioritized before this product (when an FDD unit (USB) is
connected).
1. Check if "!" is displayed in front of "TANDBERGRDX-(TS)".
If "!" is not displayed, perform the following operation to display it.
1. Select "TANDBERGRDX-(TS)".
2. Press the [Space] key.
"!" is displayed.
2. When an FDD unit (USB) is connected, check that "Y-E DATA USB-FDD-(USB
1.1)" is displayed above "TANDBERGRDX-(TS)".
If "Y-E DATA USB-FDD-(USB 1.1)" is displayed below "TANDBERDRDX-(TS)",
use the [+] and/or [-] key to move it above "TANDBERGRDX-(TS)".
3. Press the [F10] key to save the settings.
4. The BIOS Setup Utility will end.
• When an FDD unit (USB) is not connected:
Item Specific Help Boot Sequence
Change Values -/+
F9 Select Item
Select Menu
Select Sub-Menu Enter
F1
Esc
Help
Exit
F10
Setup Defaults
Save and Exit
Advanced Security Server Exit Main
Boot Sequence:
CD-ROM Drive:
+Diskette
!
TANDBERGRDX-(TS)
+Hard Drive
Legacy LAN card