PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 71 / 143

71
PRIMERGY BX600 Management Blade Hardware Guide
■
Management Agent Information (1_1)
Sets the various agents operating in the Management Blade.
❑
: Parameter
15. Fiber Channel
Displays the status of the FC Pass-Thru Blade.
"
■
Fiber Channel (1_15)" (p.125)
16. PHY Module Displays the status of the GbE Pass-Thru Blade.
"
■
PHY Module (1_16)" (p.127)
17. FC Switch
Displays the status of the FC Switch Blade.
"
■
FC Switch (1_17)" (p.129)
18. Connection Module Not normally used.
19. Storage Blade Displays the status of the Storage Blade.
"
■
Storage Blade (1_19)" (p.130)
Parameter Setting Contents
1. Set Management Agent IP
Address
(setting required) Sets the IP address of the Management Blade. Settings
become valid after restarting the Management Blade.
2. Set Management Agent
Network Mask
(setting required) Sets the subnet mask of the Management Blade. Settings
become valid after restarting the Management Blade.
3. Set Management Agent
Gateway
- Sets the gateway of the Management Blade. Settings
become valid after restarting the Management Blade.
4. Set Management Agent
Default Route
- Not normally used. Set to LAN.
5. Set Management Agent
DHCP Configure
❑
enable
❑
disable
Sets whether to set the IP address, subnet mask and gateway
of the Management Blade from the DHCP server. Settings
become valid after restarting the Management Blade.
6. Set Time Zone - Sets the time zone of the Management Blade. Supports the
time zone table.
Menu Description
(1) Set Management Agent IP Address : 192.168.1.1
(2) Set Management Agent Network Mask : 255.255.255.0
(3) Set Management Agent Gateway : 0.0.0.0
(4) Set Management Agent Default Route : LAN
(5) Set Management Agent DHCP Configure : disable
(6) Set Time Zone : (GMT+9) Osaka, Sapporo, Tokyo
(7) Set Management Agent Date Time : MM/DD/YYYY HH:MM:SS
(8) Set Management Agent Timeout(Sec) : 900
(9) Agent System Info
(-) Management Agent Administrative URL : http://192.168.1.1:80/
(11) Automatically Adjust Clock for Daylight Saving Changes : disable
(12) Agent HTTP
(13) Agent SNMP
(14) Agent Telnet
(15) Agent DNS
(16) Agent SMTP
(17) Agent NTP
(18) Agent NIC Duplex Mode
(19) Change Management Role To Slave
Enter selection or type (0) to quit:
Agent Information page_1_1
+------------------------------------------+
| |
+------------------------------------------+