PRIMERGY BladeFrame BF200, Инструкция по первоначальной настройке

Страница: 55 / 115

Installing the Hardware
Release 5.0 3-17
Air Flow
Requirements
Air flow through the BladeFrame BF200 is from front to back (see
Figure 3.10 ), and must meet the following air flow and cooling
requirements:
Figure 3.10 Air Flow
• Maximum ambient air intake temperature is 95
o
F (35
o
C).
• There must be unrestricted air intake and exhaust.
• Ideally, there should be no doors on the cabinet. If there are
doors, they must meet the following requirements:
• Doors must be perforated over 50% of their surface area.
• Doors must be at least a minimum of 2 inches from the front
of the blades.