Pad holder
Functional Area Description
Parts Included
04
Control unit
USB cable
Gel pad
PVC carry bag
Control Area
Conductive Region
1
2
3
4
1.Peel off the blue plastic film from one side of the enclosed electrode gel
pad.
2.And follow the schematic to install the electrode gel pad onto the back
side of the control unit.
3. Please keep the gel pad flat to the machine.
4. Peel off the transparent plastic film can be used
(note: Please try to avoid the gel pad sticky crooked, wrinkles and have the bubbles, if there is
bubble inside, please squeeze the bubbles outside the gel)
Charging Instructions
Before use, it is recommended to charge the EMS device with the enclosed
USB cable, which could connect to the computer or the adaptor.
When charging, the light will
flash, and when the battery is
full, the light will be
consistent on.
Sticker Operation Instructions
03
