resolution can be adjusted among 480p/720p/1080i/1080p
when using this HDMI connection.
Use remote control
V.MODE
button to toggle to
proper resolution for correct video format output.
PHD-208 doesn’t connect HDMI and Composite video
output in the same time.
When press
V.MODE
button to CVBS (480i) resolution, Composite video output port
will be activated and HDMI output port will be disabled upon toggling resolution back
to 480p or above.
Connect to Conventional Analog TV
al
Connect video cable from VIDEO output of PHD-208 to the
TV video (CVBS) input. Connect audio cable from L-AUDIO-
R output port to the TV stereo (L/R) audio inputs.
Connecting conventional video signal to analog TV, you
need to use
V.MODE
button on remote control to
switch to CVBS output, which indicated on PHD-208
front panel readout display.
Connect to Home Theater
al
The optical digital audio output provides the highest quality audio. You can connect it to
your home theater. Connect an optical cable (not include) to the back of the PHD-208 unit
using the connector marked DOLBY DIGITAL OUT. Connect the other end of this cable to the
optical input on the back of your Home Theater.
Initial Settings
After connecting your PHD-208, you need to run initial setup, which automatically sets up
available channels if RF signal connected. The initial setup appears when you turn on your
PHD-208 for the first time.
1.
Plug the Power Cable into AC In on the back of the
TV.
2.
Press
Power
button on the Remote Control or Front
Panel of PHD-208.
3.
Press the
▼
or
▲
button to select language, then press
OK
button.
Page 4
