- 2 -
Initial Installation Guide
(2) In the meantime, your TV screen should either flash one or two times or turn blue screen for as
long about 25 seconds. This long period time is for unit boot up time. It only requires when unit
completely power re-cycle by pushing ON/OFF button from PHD-101 front panel. Using remote
control “Power” key can only set the unit to standby mode. And the unit takes much faster to
turn on by pressing the remote control power key again.
(3) After boot-up, you should see the first screen from PHD-101 to prompt you to auto-scan
channels. For connecting over-the-air antenna, use remote control “OK” key to select
“Antenna” option and continue to scan all the available channels.
(4) During the auto scanning, TV screen is showing the progress of channel scan as the following
illustration indicated:
