PrimeCables Cab-CCS326, Руководство пользователя

Страница: 11 / 26

1. Keep
11
the vents clear
WARNING: To prevent accidental starting that could cause serious personal injury, always
remove the battery pack from the product when making adjustments.
0° BEVEL STOP
The saw has a 0° bevel stop that has been factory adjusted to assure 0° angle of the saw
blade plate when making 90° cuts.
CHECKING 0° BEVEL STOP
• Remove battery pack.
• Place the saw in an upside down position on a workbench.
• Check the squareness of the saw blade plate to the base of the saw using a carpenter’s
square.
ADJUSTING 0° BEVEL STOP
• Remove battery pack.
• Loosen bevel lock knob.
• Loosen hex nut securing adjusting screw.
• Turn adjusting screw and adjust base until square with saw blade.
• Tighten hex nut and bevel lock knob securely.
WARNING:
Attempting a bevel cut without having the bevel adjustment knob securely tightened can
result in serious injury.
of dust and debris. This will help prevent possible
electrical shorts and ensure proper cooling.
2. Keep the tool housing clean, free of oil and grease by using mild soap and
a damp (not wet) cloth.
3. Inspect the cord regularly and have it replaced by an authorized repair
facility if it is damaged.
4. Lubrication for this tool is done at the factory and should not be necessary
again under normal use.
5. An authorized repair center should do any repairs, modification, or
maintenance that involve disassembling the tool.
6. Any damage to the tool should be corrected at an authorized repair center.
MAINTENANCE
OPERATION
!
!