prime3 SSF41, Руководство пользователя

Страница: 7 / 22

7
SSF41
APPLIANCE ASSEMBLY AND DISASSEMBLY
1. Make sure the appliance is disconnected from the power source.
2. Assembly:
a) Arrange the fan feet (15) on a flat surface so that they form a cross base
b) Place the fan stand (11) on the cross base (15) and fasten it with screws (14)
c) Install the cap (13) of the fan base screws on the stand, so that it covers the screws
d) Adjust the height of the stand (11) and screw in the locking screw (12)
e) Mount the motor housing (7) on the fan stand (11)
f ) Install the back guard (5) on the motor body (pay attention to the notches).
g) Install the back guard mounting nut (4).
h) Install the fan blade (3) paying attention to the notches in the stem (6) and in the blade centre
opening.
i) Tighten the the blade fixing nut (2)
3. To turn off the fan, press the 0 button on the control panel.
FAN OPERATION
j) Install the front guard (1) by fitting its edge into the catches on the back guard. Then, secure it by
tightening the guard fixing screw (9).
5. Vertical tilt adjustment. To change the fan tilt, hold the appliance in position and tilt the motor body.
3 - high speed
1. Before connecting the fan to the power supply, make sure that the button on the control panel is set
to 0. Connect the appliance to the power supply.
1 - low speed
4. Oscillation. To enable the fan's oscillation movement, press the oscillation lock. To disable the fan's
oscillation movement, lift the oscillation lock.
CLEANING AND MAINTENANCE
Before cleaning and maintenance, make sure that the fan has been disconnected from the power
source.
The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior
should be blown out with compressed air or vacuumed with a vacuum cleaner.
3. Disassembly:
a) Perform the disassembly in the reverse order of the assembly procedure.
2. To start the fan, press one of the buttons on the control panel:
2 - medium speed