Prime Water Prime LC-11, Руководство пользователя

Страница: 4 / 16

06 07
Safety Guide - Read Completely Installation of Parts Guide
Improper use may cause structural damage to the unit or physical injury
If not used for several days, run water through the unit for 1 to 3 minutes before starting.
If inexperienced with drinking Ionized Alkaline Water, users are encouraged to start
with level 1.
Store Ionized Alkaline Water in an air-tight glass container and refrigerate for up to 2 days.
When handling the pH test (Reagent drops)
1. Keep away from eye area.
If eyes become irritated, flush thoroughly and consult a doctor.
2. If accidentally swallowed, drink water and consult a doctor.
3. Store in an airtight container away from the reach of children.
4. Drops are flammable. Keep away from children.
If the machine will not be used for several days....
1. Unplug the power cord from the electrical outlet.
2. Turn off the water valve to avoid leaking.
3. Remove filters, drain and place in refrigerator in plastic bags.
Do Not Drink Acidic Water.
Do Not store Alkaline or Acidic Water in metal containers.
Aluminum and brass containers will be tarnished by Alkaline and Acidic Water.
Do not block the unit vent as it can cause overheating and/or electrical probles.
Do not block the water passage or tubing.
Do not use benzene, thinner, or chemicals to clean the unit as it can damage the housing.
Customers in hard water areas may need additional treatment otherwise risk voiding their valuable
warranty. If unsure about the quality of your water please contact a water specialist.
Adapter
O-rings for Adapter
Rubber for fixing
Acidic Water outlet tubing
User Manual Tubing(1/4”)-Acidic
Tubing(3/8”)-Inlet
Drain Hose
Diverter and
screw anchors
REGULARLY CHECK AND CLEAN YOUR PRE-FILTER
Keeping the pre-filter clean is critical to the proper operation of your ionizer.
First ensure your water supply is turned off.
Then remove the pre-filter by pressing on the end of the fitting and pulling out the hose
at the same time. Rinse out the filter thoroughly to remove any built up particulate.
Rinse from both sides.
Reinstall it.
Clean the filter in this way any time you notice a decreased flow from your ionizer.
Dust Pre-filter
pH Color chart
Reagent drops / Fuse
3/8”-1/4” Fitting