3.1. Control Buttons
Start
: To start counting process (under Manual Mode).
Add
: To set accumulation counting.
Batch
: To set batching counting.
+ / -
: To add or subtract batching numbers.
UV
: To set on/off UV counterfeit detection method
MG
: To set on/off MG counterfeit detection method
SET
: To set further settings (only for technician)
HIGH QUALITY AND
4
4. Operating Instructions
4.1. Power Up
Connect the power cord to the machine (power outlet), then plug it to apower source and turn
the switch on; the unit will conduct a self-check by spanning the feeding roller. The counter
display will show “ 0 ”when the unit is ready <the machine is in its normal working condition>.
4.2. Counting Instruction
BILL COUNTER WORLD
Note: There are two kinds of starting modes: Automatic and Manual.
-Automatic Mode
: Machine will start counting process automatically when banknotes
are put in the hopper.
-Manual Mode
: Machine will start counting process after banknotes are put in the
hopper and “Start” button is pressed.
Note:
To switch between Auto and Manual mode:
1.
Press and hold Set button for 5 seconds until display blinks (showing 4).
2.
Press Set button 7 times, display will blink and show “OFF” or “ON” and “auto as”.
3.
Press + button to switch from OFF or ON.
OFF
= Manual mode.
ON =
Auto
mode.
4.
Press Start button to save.
In auto mode, once the bills are correctly placed in the hopper, the machine will start counting
automatically. The number of counted bills and their value will be shown on the LCD display.
In Manual-Mode, after placing the bills, press “Start” to start counting.
