Prime Design VRI3-FT31B, Инструкция по сборке

Страница: 9 / 16

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
9
VRI3-FT31B
ASSEMBL
Y INSTR
UCTIONS–RIGHT SIDE RO
TA
TION
Torque to
80 in-lbs
11.8
Slide the L Post until parallel
to the Auto Clamp and the
gap between the two is
even from top to bottom
11.7
Repeat steps 11.1
-
11.8 for
the front L Post installation
11.9
Refer to the Quick
Start Guide for Z
Post positioning.
12.2
12.3
Torque to
90 in-lbs
Repeat steps 12.1 - 12.3 for
the front Z Post installation
12.4
Ensure both Z Post Mounting
Clamps are fully seated into
the top groove of the Upper
12.1
Slide the Z Post into the Mounting Clamp Assembly
Z POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
11.6
Assemble the L Post
hardware. Do not
tighten until Step 11.8
Bracket Clamp sits
in L Post Bracket
as shown
11.5