Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
2
End Stops (2X)
Caps, Large (4X)
Caps, Small (8X)
1
1
Small Cap
Large Cap
FEA-0001 ASSEMBL
Y
INSTR
UCTIONS
1—FEA-0001 .......................................................... (Qty 1)
Ladder End Stops w/Crossbar Caps
CONTENTS OVERVIEW
One Ladder Stop Kit will be needed for two Crossbar ends.
For a Base/Base (VBB) model, order a quantity of two kits
to place Ladder Stops at both ends of two Crossbars.
For a three Crossbar Base/Base (VBB3) model, order three
kits to place Ladder Stops at both ends of three Crossbars,
or two kits to place them on one side of three Crossbars.
CROSSBAR CAPS
LADDER STOPS
1.1
1.2
2.1
2.2
USAM-FEA0001-US01 Rev-A 0618
Loosen the nut to allow
the End Stop to slide into
the Crossbar groove
Position the Ladder Stop to
the desired location, then
torque the nut to 90 in-lbs.
NOTE:
Some Front Crossbars may
have additional drilled holes. Press
Crossbar Caps into Crossbar holes if
present and unused.
