Confidential
User Guide
Primax Electronics Ltd.
7
6. Enter the pin code 0000 to connect (or
“
pair
”
) PHS-5 variants to the phone.
PHS-5 variants beeps once and an active Bluetooth connection is displayed by a
blinking blue indicator light.
If PHS-5 variants is turned on within 10 meters of several paired phones, the headset
will try to connect to the last connected phone within 20 seconds. If the headset
cannot connect to the last connected phone(for example, phone is turned off or it
rejects the connection), it remains connectable until user action or Headset
’
s battery
runs out. which is displayed by the blinking blue indicator light.
7. Start using the headset.
5. Disconnecting the Bluetooth headset from the phone
To disconnect PHS-5 variants from the phone, do one of the following:
1 Turn off PHS-5 variants.
2. Disconnect PHS-5 variants in the phone menu.
3. Move the headset more than 10 meters away from the phone.
Note that you do not need to delete the pairing with the headset to disconnect it.
When you reconnect a paired headset, you will not be asked for its pin code again.
6. Reconnecting the paired Bluetooth headset to the compatible
phone
To reconnect PHS-5 variants
to the last connected phone, you can use any one of
the following actions:
1. Restart PHS-5 variants
by powering off and power on again.
2. Make the connection in the phone menu as instructed in the user guide of your
phone.
3. Press the Power/send/end key and Volume up key together for about 2 second
4. Press the Power/send/end key and Volume down key together for about 2
second.
5. Take the headset 10 meters away the connected phone, headset will
disconnect from the phone, come back within 10 minutes and the headset will
auto reconnect with the phone.
