GB
| Operating Instructions
3
2. Safety regulations
This machine is not intended for use by persons (including children) with an impaired
physical, sensory or mental capacity or insufficient experience and/or insufficient knowl
-
edge unless they are supervised by a person responsible for their safety or receive
instructions from that person in the use of the machine. Children should be supervised
in order to ensure that they do not play with the machine.
Remain alert, pay attention to what you are doing and proceed sensibly when working
with an electric tool. Do not use the machine if you are tired or under the influence of
drugs, alcohol or medication.
General safety information for power tools
Warning!
Read all safety-related information and safety instructions! Failure to
observe the safety information and instructions may result in electric shock, burns
and/or severe injury.
Keep the safety information and instructions for future reference.
The term ‘power tool’ as used in the safety information and instructions includes both
mains-operated tools (with power cord) and battery-operated tools (without power cord).
1) Safety at the workplace
a) Keep your working area clean, tidy and well-lit.
Disorder and poorly lit working
areas may result in accidents.
b) Do not operate the power tool in potentially explosive environments containing
combustible fluids, gases or dusts.
Power tools generate sparks that may ignite
dusts or fumes.
c) Keep children and other persons away while you are operating the power tool.
Distractions may result in the operator loosing control over the tool.
2) Electrical safety
a)
The mains plug of the power tool must fit into the mains socket. The plug must
not be modified in any way. Do not use adapter plugs/connectors in combi
-
nation with tools with protective earthing.
Unmodified plugs and fitting sockets
reduce the risk of electric shock.
b) Avoid physical contact with earthed surfaces as pipes, heaters, ovens and
refrigerators.
There is an increased risk of electric shock if your body is earthed.
c) Keep the tool out of the rain or moisture in general.
The penetration of water into
a power tool
increases the risk of electric shock.
d) Do not use the cord to carry or hang up the tool or to pull the plug out of the
socket. Keep the cord away from heat, oil and sharp edges or moving parts of
the tool.
Damaged or tangled cords increase the risk of electric shock
.
e) When operating a power tool outdoors, use exclusively extension cords that
are approved for outdoor-use.
The use of an extension cord that is suitable for
outdoor use reduces the risk of electric shock.
f) If the operation of a power tool in a moist environment cannot be avoided it is
Содержание PMAS 750
