Primare DVD30, Руководство пользователя

Страница: 24 / 42

19
DVD30 UNIVERSAL DISC PLAYER
SETUP MENUS
This chapter gives an overview of all set up menus
of the DVD30 player and a detailed description
of how to use them.
Using the Setup menu
The Setup menu gives you access to all the player’s
settings. Press SETUP to display/leave the menu and the
cursor buttons and SELECT on the remote to navigate
and select options. In some screens you can press
the button to leave the screen without making any
changes. The controls for each menu are shown at the
bottom of the screen. If an option is grayed out it means
that it cannot be changed at the current time. This is
usually because a disc is playing. Stop the disc, then
change the setting. The current setting for any option is
marked with a highlighted box.
Audio DRC
• Default setting: Off
When watching Dolby Digital DVDs at low volume, it’s
easy to lose the low level sounds completely—including
some of the dialog. Switching on Audio DRC (Dynamic
Range Control) can help things by bringing up the low
level sounds, while keeping the lid on high level peaks.
The ‘Off ‘ setting leaves the original dynamics intact; ‘On’
‘squashes’ the dynamics; but exactly how much difference
you can hear between the settings will depend on the
material you’re watching.
Dolby Digital Out
• Default: Dolby Digital
You only need to make this setting if you connected this
system to another component (AV amplifier, etc.) using
one of the digital outputs.
• If your AV amplifier (or other connected component)
is Dolby Digital compatible, set to ’Dolby Digital’,
otherwise set to ’Dolby Digital - PCM’.
DTS Out
• Default setting: DTS - PCM
You only need to make this setting if you connected the
player to another component (AV amplifier, etc.) using
one of the digital outputs.
• If your AV amplifier (or other connected component)
has a built-in DTS decoder, set this to ’DTS’,
otherwise set to ’DTS - PCM’. Check the manual that
came with the other component if you’re unsure
whether it is DTS compatible.