DD35 Compact Disc Transport User Guide
7
GETTING STARTED
1 Unpack the DD35
Your DD35 is supplied with:
This User Guide
Mains cable
IR cable
Trigger cable
C5 remote control with batteries
AC Polarity Pen
If any of these items are missing please contact your
supplier. We recommend you retain the packaging in
case you need to transport the unit at a later date.
Note that the DD35 is supplied with a protective film on
the display glass. Remove the film for a clearer whiter
display.
l
l
l
l
l
l
2 Connect to an amplifier
Digital outputs
The DD35 Compact Disc Transport provides one coax
digital output and one optical digital output for connection
to a digital preamplifier or digital surround processor.
Connect the appropriate output to your preamplifier or
surround processor using a suitable cable.
3 Connect power
Plug one end of the mains cable supplied with the
DD35 into the power connector on the back panel,
and connect the other end to a wall socket.
If this cable is not suitable for your power outlets please
contact your supplier for an alternative cable.
note
: See
Phase, page 1, for information about getting
the best sound from your DD35.
WarninG:
Always disconnect the DD35 from the
mains power before connecting or disconnecting
any cables.
Switch on the DD35, using the switch on the back panel.
The standby indicator will light up on the front panel.
to switch on from standby
Press the
O
button on the front panel or remote control.
The display shows:
PRIMARE
l
l
l
l
4 play a CD
Press and hold the
*
/
å
button on the front panel or
remote control to open the tray.
Place the CD in the tray with the label facing upwards.
Press the
>
/
]
button on the front panel, or the
>=
button on the remote control, to close the tray and start
playing the disc.
For more information about playing a CD see
Using the
DD35, page 10.
l
l
l
