P r i m a L u c e L a b i S r l
E AG L E 3 U s e r M a n u a l
-
remotely turn on/off the entire telescope
EAGLE has a classic ON/OFF button for turn on/off the unit. But it is pre-set to allow the user to turn on or turn off the
whole system remotely (when controlled through a network cable connection). After switching on the EAGLE, the user can
activate remotely connected devices and use the telescope. At the end of the capture, the user first turns off the various
devices (camera, mount, etc.) and then EAGLE.
Press the ADVANCED SETTINGS button and, in the window that opens, you can set the switch ON/OFF setting you prefer
for the POWER button of the EAGLE Manager software. In order to switch off the EAGLE when you press the POWER but-
ton, please select the “Power off” setting. You can also select the “Standby” mode (useful for remote power in when EA-
GLE2 is connected to a wired network, please see next paragraph) or “Restart” (to restart it). Click OK to confirm. To switch
off EAGLE now you can press the POWER button.
p a g e
!
3 1
click on AD-
VANCED SET-
TINGS to set
switch ON/OFF
settings.
Image 34: ADVANCED SETTINGS button in EAGLE Manager
Image 35: ADVANCED SETTINGS window
Tip: if, using EAGLE
Manager, you are no
more able to control
power out ports or
USB ports of the EA-
GLE, go to ADVANCED
SETTINGS and click
RECONNECT button.
