F
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
7. Slide the inner part of the Stabilizer Bar into
the outer part. Attach Stabilizer Bar
D
to the top
rung of the Theft Deterrent Ladder Section with
1 - M12x45w bolt and 1 wingnut
.
Insert the Adjustment Knob
E
in the Stabilizer
bar at the proper adjustment point to the tree.
9. Tie one end of Tiedown Rope
F
to the
inner part of Stabilizer Bar near the flanged
end. Wrap the rope around the back of the
tree once. Then tie the other end of the rope
to the stabilizer bar.
8. Refer to the original manufacturer’s
instructions to raise the stand against the tree.
Move base of ladder toward or away from tree
slightly in order to make Platform as parallel to
the ground as possible.
10. After the ladder stand has been secured to the tree with the
installation straps, and the stabilizer bar has been securely attached to
the tree, continue to have two people hold the ladder, climb cautiously
up to the platform.
Once you reach the top,
IMMEDIATELY ATTACH YOUR SAFETY
HARNESS TO THE TREE.
Keep the tether strap above your head.
NOTE:
Drawings are for illustration purposes only and may not depict actual product.
WARNING
Stabilizer Bar and Installation Ropes
MUST
be secured prior to climbing the
Ladderstand. Failure to comply may result
in serious injury or death.
WARNING
DO NOT
climb ladder without stabilizer bar
installed. Serious injury or death may occur if
stabilizer bar is not installed.
ASSEMBLY INSTRUCTIONS PAGE 3
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.PRIMALVANTAGE.COM
MODEL: HEH00592
LADDER KIT WITH THEFT DETERRENT
©2013 (rev. 11/12)
45w
E
D
