Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
You MUST
lower the stand to the ground before assembling the Ladder Section to your stand.
You
MUST
have the help of at least two other people
1. With the help of at least two other people, lower your Field & Stream treestand to the ground.
Remove the damaged ladder section from the other ladder sections.
ASSEMBLY INSTRUCTIONS PAGE 1
MODEL: HEH00595
20” REPLACEMENT LADDER
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
©2012 (rev. 04/12)
WWW.TREESTANDCUSTOMERSERVICE.COM
1. Insert Replacement Ladder Section
A
into the sleeved end of Ladder Section.
3. Close the quickclip to secure
the ladder sections together.
2. Insert
1 - Quickclip
through the hole
on each side of the ladder section.
A
4. Re-attach Stabilizer Bar to the second rung
of the Ladder Section with
1 - M12x45w bolt
and 1 wingnut
.
Reuse Adjustment Knob in the Stabilizer bar at
the proper adjustment point to the tree.
5. Refer to the original manufacturer’s
instructions to raise the stand against the tree.
Move base of ladder toward or away from tree
slightly in order to make Platform as parallel to
the ground as possible.
45w