Primada PRH900, Инструкция по эксплуатации

Страница: 37 / 49

35
4.2 Installation Details
Do not tilt the appliance forward
when installing, or the oil may not
be able to drain into the oil cup.
The height difference between
the cooktop and the appliance
must be within 630-700 mm.
Aluminum foil tube length calculation method:
Under standard installation, the maximum length of aluminum foil tube is 10 meters.
If the installation requires more than 10 meters of aluminum foil tube, a relay fan
must be installed. Please contact after-sales customer service for more information.
must be within 630-700 mm.
If the appliance can not be installed on the wall, use a wood plate or other material
plate to support at the back of the side panels. This is to ensure it is sealed between
side panels and the wall.
The distance between center of the
cooktop and wall must be more
than 260 mm. It is recommended
to use pots that is no more than 40
cm in diameters.
All aluminum foil tubes joints must be seal properly, the wind cover and outlet pipe
joints must seal with glue.
If using 45° connector tube - equivalent
to 2 meters of straight tube.
If using 90° connector tube - equivalent to
3 meters of straight tube.
Connecting the aluminum
foil tube to the rangehood:
Place the aluminum foil
tube onto duct seat; Then
apply the ducting clamp
around it firmly.
Connecting aluminum foil tube onto wall tube: Place the aluminum foil tube onto
the wall tube from inside;Then apply glue to secure the aluminum foil tube firmly
from outside; Make sure it is sealed.
Cooktop
Cupboard
Side panel
Cooktop
Air outlet
45° Connector tube equivalent
to 2 meters of straight tube
90° Connector tube
equivalent to 3 meters
of straight tube
45° Connector tube
equivalent to 2 meters
of straight tube
Relay box
Ducting clamp
Duct seat
Ducting clamp (to tighten aluminum
foil tube and duck seat)
Sealed with glue after
connecting on to wall tube