Prima PS-32HU35S, Руководство по обслуживанию

Страница: 5 / 35

3
effect.
1.21 There is piece of insulator stuck on the rear chassis corresponding to the power supply board.
It is used to isolate the cool part from the hot part. Please take care to keep it intact lest it should
become a potential safety trouble.
1.22 In addition to plasma screen, the glass is a part of high value. It has such functions as
anti-radiation, adjustment of color temperature etc. Please handle it carefully.
Alignment instructions
1. Test equipment
PM5518 (video signal generator)
VG-848 (VGA, HDMI signal generator)
VG-849 (digital video signal generator)
CA210 (color analyzer)
2. Power test
Connect main board, power board and IR board according the wiring diagram, connect the power
and press “standby” to turn on the TV.
Test the pin voltage of XS15, the data is shown in table1:
Table1 voltage data of XS15
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11
LC-26HUXX 8.55-9.45V 0 4.75-5.5V 0 11.69-12.92V 0 4.75-5.5V 0 H
LC-32HUXX 8.55-9.45V 0 4.85-5.36V 0 11.4-12.6V 0 4.85-5.36V 0 H
Test the pin voltage of XS16, the data is shown in table2:
Table2 voltage data of XS16
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6
LC-26HUXX 0 4.75-5.5V 0 8.55-9.45V 0 30.4-33.6V
LC-32HUXX 0 4.85-5.36V 0 8.55-9.45V 0 31.36-32.64V
Test the pin voltage of XS11, the data is shown in table3:
Table3 voltage data of XS11
Pin1 Pin2 Pin3 Pin4 Pin5
LC-26HUXX 20.25-23.63V 0
LC-32HUXX 22.8-25.2V 0
3. Alignment flow-chart
The alignment flow-chart is shown as fig-1
Check DDC, FLASH, HDCP and power control IC
Combined test for general assembly