background image

38

 www.pridemobility.com                                   Victory ES Series

I X .   C A R E   A N D   M A I N T E N A N C E

WHEEL REPLACEMENT

If your scooter is equipped with pneumatic tires and

you have a flat tire, you can have the tube replaced.

If your scooter is equipped with a solid tire insert,

either the solid insert or the entire wheel must be

replaced depending on the model. Contact your

authorized Pride Provider for information regarding

replacement wheels for your scooter.

WARNING! Wheels on your scooter

should only be serviced/replaced by

an authorized Pride Provider or

qualified technician.

Figure 25. Solid Tire Wheel Removal

WARNING! Completely deflate pneumatic tires before dismantling the rim or attempting repair.

WARNING! Be sure that the key is removed from the key switch and the scooter is not in

freewheel mode before performing this procedure repair.

WARNING! When changing a pneumatic tire, remove only the lug nuts, then remove the

wheel. If any further disassembly is required, deflate the tire completely or it may explode.

Follow these easy steps for a quick and safe repair for solid tires:

1. Remove the key from the key switch.

2. Elevate the side of the scooter of which you are removing the tire. Place wooden blocks under the

frame to elevate the scooter.

3. Remove the drive wheel nut and washer from the axle.

 See figure 25.

4. Pull the wheel off the axle.

5. Slide the new wheel back onto the axle. Make sure the axle key is in the axle slot.

WARNING! Failure to ensure that the axle key is properly installed into the axle slot when mounting

the wheel can result in electronic brake failure, personal injury, and/or product damage.

6. Reinstall the drive wheel nut and washer onto the axle and tighten.

WARNING! Make sure that both the nut and washer are reinstalled and tightened

properly.

7. Remove the blocks from beneath the scooter.

ABS PLASTIC SHROUDS

The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are

coated with an advanced formula urethane paint.

A light application of car wax will help the shrouds retain their high gloss.

AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY

These items are all prelubricated, sealed, and require no subsequent lubrication.

MOTOR BRUSHES

The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi-

cally for wear by your authorized Pride Provider.

WASHER

NUT

Содержание Victory ES Series













































Отзывы: