background image

10

www.pridemobility.com

Stylus LS

I I .   S A F E T Y

Stairs and Escalators

Wheelchairs are not designed to travel up or down stairs or escalators. Always use an elevator. 

WARNING! Never use your wheelchair to negotiate steps or escalators.

Doors

„

Determine if the door opens toward or away from you.

„

Drive your wheelchair gently and slowly forward to push the door open. Or drive your wheelchair gently and

slowly backward to pull the door open.

Elevators

Modern elevators have a door edge safety mechanism that, when pushed, reopens the elevator door(s).

„

If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge or allow
the rubber door edge to contact the wheelchair and the door will reopen.

„

Use care that pocketbooks, packages, or wheelchair accessories do not become caught in elevator doors.

Lift Systems/Elevation Products

If you will be transporting your wheelchair during travel, you may find it necessary to use a vehicle-mounted lift

system or elevation product to aid in transportation. Pride recommends that you closely review the warnings,

instructions, specifications, and safety information set forth by the manufacturer of the lift/elevation product

before using that product.  

WARNING! Not all lift systems/elevation products are rated for use with an occupied mobility

device. Pride recommends that you do not remain seated in your wheelchair when it is being

used in connection with any type of lift system/elevation product unless:

„

That product is rated for occupied use by the manufacturer. 

„

You are able to occupy your mobility device in strict conformity with the warnings,

instructions, specifications, and safety guidelines set forth by the manufacturer.

Motor Vehicle Transport

Pride recommends that you do not remain seated in your wheelchair while traveling in a motor vehicle. Your

wheelchair was designed to be folded and stored in a secure location, such as the trunk of a car, during motor

vehicle transport. In addition, all removable wheelchair parts, including the armrests and front riggings should be

removed and/or properly secured during movement.

WARNING! Do not sit on your wheelchair while it is in a moving vehicle.

Positioning Belts

Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for determining

your requirement for a positioning belt in order to operate your wheelchair safely. Typically, the positioning belt

is not designed for use as a restraining device in a motor vehicle. You should be properly belted into seats

approved by the vehicle manufacturer with your wheelchair properly stowed for vehicle transport.

WARNING! If you require a positioning belt to safely operate your wheelchair, make sure it is

fastened securely in order to reduce the possibility of a fall from the wheelchair. 

WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is

your wheelchair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should

be properly belted into seats approved by the vehicle manufacturer.

Содержание STYLUS LS

































Отзывы: