background image

WARNING! A Quantum Rehab Provider or a qualified technician must perform the initial

setup of this power chair and must perform all of the procedures in this manual.

The symbols below are used throughout this owner's manual and on the power chair to identify warnings

and important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow

designated procedures can cause either personal injury, component damage, or

malfunction. On the product, this icon is represented as a black symbol on a yellow

triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform

mandatory actions can cause personal injury and/or equipment damage. On the product,

this icon is represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any

time or in any circumstances. Performing a prohibited action can cause personal injury

and/or equipment damage. On the product, this icon is represented as a black symbol

with a red circle and red slash.

Intended Use

The intended use of the Pride Mobility Products device is to provide mobility to persons limited to a seated 

position that have the capability of operating a power chair.

Quick Reference Information

S A F E T Y   G U I D E L I N E S

Copyright © 2011
Pride Mobility Products Corp.
INFMANU4309/Rev A/December 2011

Quantum Rehab Provider:

Address:

Phone Number:

Purchase Date:                                                         

NOTE: This owner’s manual is compiled from the latest specifications and product information

available at the time of publication. We reserve the right to make changes as they become necessary.

Any changes to our products may cause slight variations between the illustrations and explanations in

this manual and the product you have purchased. The latest/current version of this manual is available

on our website.

Содержание Quantum Rival series









































Отзывы: