Pride Quantum Q6 Edge Скачать руководство пользователя

Страница: 14 / 44

www.pridemobility.com

Q6 Edge HD

WARNING! Pride does not recommend using the power chair as a seat in a motor vehicle. The

power chair user should transfer into the vehicle seat and use the vehicle-installed belt restraint

system if and whenever feasible.

WARNING! Always be sure your power chair and its batteries are properly secured when it is

being transported. Batteries should be secured in an upright position and protective caps should

be installed on the battery terminals. Batteries should not be transported with any flammable or

combustible items.

Positioning Belts

Your Quantum Rehab Provider, therapist(s), and other healthcare professionals are responsible for determining

your requirement for a positioning belt in order to operate your power chair safely.

WARNING! If you require a positioning belt to safely operate your power chair, make sure it is

fastened securely in order to reduce the possibility of a fall from the power chair.

WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is

your power chair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should

be properly belted into seats approved by the vehicle manufacturer.

Batteries

In addition to following the warnings below, be sure to comply with all other battery handling information. For

more information about your power chair’s batteries, see VI. “Batteries and Charging.”

MANDATORY! Battery posts, terminals, and related accessories contain lead and

lead compounds. Wear goggles and gloves when handling batteries and wash hands

after handling.

WARNING! Power chair batteries are heavy. See specifications table. If you are

unable to lift that much weight, be sure to get help. Use proper lifting techniques and

avoid lifting beyond your capacity.

WARNING! Always protect the batteries from freezing and never charge a frozen

battery. Charging a frozen battery may result in damage to the battery.

WARNING! Connect your battery harnesses in the proper manner. RED (+) cables

must be connected to positive (+) battery terminals/posts. BLACK (-) cables must be

connected to negative (-) battery terminals/posts. Protective caps should be installed

over all battery terminals. REPLACE cables immediately if damaged.

Removable Parts

WARNING! Do not attempt to lift or move a power chair by any of its removable parts, including

the armrests, seat, front riggings, controller, and shrouds. Pride recommends use of only solid,

non-removable frame components to lift or move your power chair.

Preventing Unintended Movement

WARNING! If you anticipate being seated in a stationary position for an extended period of time,

turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This will

also eliminate the possibility of unintended chair movement from electromagnetic (EM) sources.

I I . S A F E T Y

Содержание Quantum Q6 Edge













































Результаты поиска

Содержание Quantum Q6 Edge

Отзывы:

Похожие инструкции для Quantum Q6 Edge

Бренды по названию

Популярные бренды

Pride Quantum Q6 Edge, Руководство пользователя

Результаты поиска

Содержание Quantum Q6 Edge

Отзывы:

Похожие инструкции для Quantum Q6 Edge

Бренды по названию

Популярные бренды