Pride Jazzy 600 ES, Руководство пользователя

Страница: 14 / 36

14 www.pridemobility.com Jazzy 600 ES
I V . A S S E M B L Y
Figure 10. Seat Installation–UK Occupied Transit
Securement System
5. Plug the controller connector into the rear of the
power base. See figure 3.
6. Secure the controller harness to the armrest
receiver with wire ties. See figure 11.
To install the seat (UK Occupied Transit):
1. Attach the seat plate to the power base and ensure
all hardware is properly installed and securely
tightened. See figure 10.
2. Install the controller and route the harness to the
back of the power chair. See figures 9 or 11.
3. Remove the rear shroud. See figure 2.
4. Plug the controller connector into the power base.
See figure 3.
5. Reinstall the rear shroud. See figure 2.
6. Route the controller harness so that it cannot be
pinched in the seat hinges. See figure 9 or 11.
MANDATORY! Prevent controller
harness damage! Use correct tie-down
points for controller harness. Avoid
routing the controller harness on the
outside of the armrest pad. Route the
harness under the armrest or toward
the inside of the armrest pad. Use
correct tie-down points for the
controller harness to prevent the
harness from getting caught in the
drive tires, pinched in the seat frame,
or damaged when passing through
doorways.
7. Secure the controller harness to the armrest
receiver with wire ties. See figure 11.
Figure 11. Controller Harness Routing on a Contour Seat
WIRE TIES
TO POWER BASE
SEAT PLATE