Pride Jazzy 1105 Скачать руководство пользователя страница 30

Страница: 30 / 47

www.pridemobility.com

Jazzy 1105/RevH/Feb03

BATTERIES

Your Jazzy 1105 uses two long-lasting, 12-volt batteries. These batteries are sealed, maintenance free,

deep-cycle batteries. Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-

cycle batteries are designed to handle a longer and deeper discharge. Though they are similar in appearance

to automotive batteries, they are not interchangeable. Automotive batteries are not designed to handle a

long, deep discharge and also are unsafe for use in power chairs.

CHARGING THE BATTERIES

The battery charger is essential in providing long life for your Jazzy 1105 batteries. See figure 25. The

battery charger is designed to optimize your Jazzy 1105s performance by charging the batteries safely,

quickly, and easily. The charging system consists of the charger, the charger fuse and the ammeter, all of

which can be located on the rear battery box. The ammeter and the charger are only functional when the

charger power cord is plugged into a wall outlet. The Jazzy will not operate when the charger is plugged

into the wall outlet.

WARNING! Never use an extension cord to plug in your battery charger. Plug the charger directly

into a properly wired standard wall outlet.

To charge the batteries using the onboard battery charger:

1. Position the rear of your Jazzy 1105 close to a standard wall outlet.

2. Be certain the controller power is turned off and the freewheel levers are in the engaged position. See

IV. The Jazzy 1105 in this manual.

3. Lift off the rear cover.

4. Extend the charger power cord and plug it into the wall outlet. The Jazzy 1105 incorporates an inhibit

function that disables the power chair when the charger is plugged into a wall outlet.

5. The ammeter indicates how much charge is needed to fully charge the batteries. Wait about a minute for

the charger to warm up. The ammeter may move as high as 5.5 amps, then gradually move back down

to 0 amps as the batteries charge.

6. We recommend you charge the batteries for 8 to 14 hours. As the batteries charge, the ammeter needle

slowly drops to zero. When the batteries are fully charged, the needle vibrates on or near the zero mark

on the ammeter scale.

7. When your Jazzy 1105s batteries are fully charged, you can unplug the power cord from the wall

outlet, wind it up using the hook and loop strap, and place the cord back into the rear tray.

8. Secure the rear cover.

WARNING! Battery posts, terminals and related accessories contain lead and lead compounds.

Wash hands after handling.

WARNING! Always protect batteries from freezing temperatures and never charge a frozen

battery. This damages the battery and may cause personal injury. Attempting to charge a battery

in freezing conditions does not prevent a battery from freezing.

I X . B A T T E R I E S A N D C H A R G I N G

WARNING! You must recharge your Jazzys batteries with the supplied onboard or off-board

charging system. Do not use an automotive-type battery charger.

Содержание Jazzy 1105
















































Результаты поиска

Содержание Jazzy 1105

Отзывы:

Похожие инструкции для Jazzy 1105

Бренды по названию

Популярные бренды

Pride Jazzy 1105, Руководство пользователя

Результаты поиска

Содержание Jazzy 1105

Отзывы:

Похожие инструкции для Jazzy 1105

Бренды по названию

Популярные бренды