32
Celebrity X Sport
www.pridemobility.com
V I . CO M F O R T A D J U S T M E N T S
MIRROR POSITION
To install the mirror (see figure 19):
1. Determine a side to install the mirror and remove the
rubber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into the
opening and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure the
mirror in place.
To adjust the mirror:
1. Position yourself in a seated driving position facing
forward.
2. Adjust the mirror left, right, up or down until you have
a good line of sight behind you.
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-type
positioning belt that can be adjusted for operator comfort.
See figure 20. The positioning belt is designed to help sup-
port the operator so that he/she does not slide down or for-
ward in the seat. The positioning belt is not designed for
use as a restraining device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bot-
tom of the seat base.
3. Remove the two bolts on the outermost part of the rear
seat mounting strap.
4. Insert the bolt through the appropriate end of the posi-
tioning belt and then through the seat mounting strap
for each side of the scooter seat.
5. Tighten the bolts.
Figure 19. Mirror Installation
PLUG
MIRROR HOLDER
NUT
Figure 20. Positioning Belt
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you
hear a “click.”
2. Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.
MANDATORY! Make sure the positioning belt is properly secured to the scooter and is
adjusted for operator comfort.
MANDATORY! Inspect the positioning belt for loose or damaged parts before each use of
the scooter. If you discover a problem, contact your authorised Pride Dealer for
maintenance and repair.
