manualshive.com logo in svg

Pride Mobility SPARKY, Руководство пользователя

Поделиться
Скачать
Pride Mobility SPARKY Скачать руководство пользователя страница 28

28

www.pridemobility.com

Sparky

Controller Position

You can move the controller in toward or out away from

the armrest.

NOTE: To change the position of the controller for

either left-hand or right-hand use, contact your Quan-

tum Rehab Provider.

WARNING! Prevent controller harness

damage! Avoid routing the controller

harness on the outside of the armrest

pad. Route the harness under the

armrest or toward the inside of the

armrest pad. Use correct tie-down

points for the controller harness to

prevent the harness from getting

caught in the drive tyres, pinched in the

seat frame or damaged when passing

through doorways.

To extend the controller:

1. Loosen the adjustment knob on the armrest. 

See

figure 23.

2. Slide the controller into or out to the desired

position.

3. Tighten the adjustment knob to secure the

controller.

Anti-Tip Wheels

The anti-tip wheels are an integral and important safety

feature of your power chair. They are bolted to the frame

at the rear of the power chair. 

See figure 24.

PROHIBITED! Do not remove the anti-tip

wheels or modify your power chair in

any way that is not authorised by Pride.

I V .   C O M F O R T   A D J U S T M E N T S

Figure 23. Controller Position

Figure 24. Anti-tip Wheels

ADJUSTMENT 

KNOB

SECUREMENT CLIP

ANTI-TIP WHEELS

Содержание SPARKY













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды