background image

J

et 2 HD

www.pridemobility.com

      11

I I .   S A F E T Y

Inclement Weather Precautions

Exposure of your power chair to inclement weather conditions should be avoided whenever possible. If suddenly
caught up in rain, snow, severe cold, or heat while operating your power chair proceed to shelter at the earliest
opportunity.  Thoroughly dry your power chair before storing, charging, or operating your power chair.

WARNING! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery surfaces

can cause personal injury and/or damage to the power chair and electrical system. Maintain

and store your power chair in a dry and clean condition.

Motor Vehicle Transport

Pride recommends that you do not remain seated in your power chair while traveling in a motor vehicle. The power
chair should be stowed in the trunk of a car or in the back of a truck or van with the batteries removed and
properly secured.

WARNING! Do not sit on your power chair while it is in a moving vehicle. Personal injury

and/or property damage may result.

WARNING! Always be sure your power chair and its batteries are properly secured when it

is being transported. Failure to do so may result in personal injury and/or damage to your

power chair.

Positioning Belts

Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for determining
your requirement for a positioning belt in order to operate your power chair safely.

WARNING!  If you require a positioning belt to safely operate your power chair, make sure

it is fastened securely. Serious personal injury may result if you fall from the power chair.

WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle.

Nor is your power chair suitable for use as a seat in any vehicle. Anyone traveling in a

vehicle should be properly belted into seats approved by the vehicle manufacturer.

Reaching and Bending

Never reach, lean, or bend while driving your power chair. If it is absolutely necessary to reach, lean, or bend while
seated on your power chair, it is important to maintain a stable center of gravity and keep the power chair from
tipping. Pride recommends that the power chair user determine his/her personal limitations and practice bending
and reaching in the presence of a qualified healthcare professional.

WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the

floor by reaching down between your knees. Movements such as these may change your

center of gravity and the weight distribution of the power chair. This may cause your

power chair to tip, possibly resulting in personal injury.

WARNING! Prevent personal injury! Keep your hands away from the tires when driving. Be

aware that loose fitting clothing can become caught in drive tires.

Содержание Jet 2HD








































Отзывы: