28
www.pridemobility.com
Jet12/RevC/Feb03
I X . O P E R A T I O N
DYNAMIC DL CONTROLLER
The Dynamic DL controller joystick has one knob that combines both speed and response functions. See
figure 33. When you increase the speed, you decrease the sensitivity. When you decrease the speed, you
increase the sensitivity.
NOTE: We recommend that you turn the speed and response adjustment knob completely counterclockwise
(to the slowest setting) the first few times you operate your Jet 12 to allow yourself to become familiar with
your new power chair.
Figure 33. Dynamic DL Controller
BATTERY CONDITION
METER
SPEED/RESPONSE
ADJUSTMENT KNOB
WARNING! If your power chair begins to move in an unexpected manner, immediately
release the joystick. Unless the joystick is damaged, this action should stop your power
chair.
WARNING! Unless faced with an emergency situation, do not use the on/off key to stop
the chair. This will cause the power chair to stop abruptly.
WARNING! Always turn the power off when you are stationary to prevent unexpected
movement.
BATTERY CONDITION METER
The battery condition meter is located immediately behind the joystick. This enables you to monitor battery
charge. The battery condition meter indicates the approximate amount of battery charge left. See figure 33.
n
Red, yellow, and green LEDs indicate that the batteries are fully charged.
n
Red and yellow LEDs indicate that you should charge the batteries if possible.
n
Red LEDs indicate that you should charge the batteries as soon as possible, because low battery voltage
may cause your Jet 12 to become inoperative.
NOTE: When the batteries begin to approach a discharged state, the first red LED will begin to slowly
flash, reminding you that the batteries need to be charged immediately!