24
www.pridemobility.com
Select Traveller
V . C O M F O R T A D J U S T M E N T S
Controller Position
You can move the controller in toward or out away from the
armrest, or change the position of the controller for either left-
hand or right-hand use.
WARNING! Do not place the controller
and charger cables so that they can be
pinched in the seat frame or the power
base frame.
To extend the controller:
1. Flip up the armrest so it is perpendicular to the floor.
2. Loosen the setscrew on the controller bracket. See
figure 13.
3. Slide the controller into or out of the armrest to the de-
sired position.
4. Tighten the setscrew to secure the controller.
To change the controller position:
1. Unplug the controller and off-board charger port con-
nectors from the power base.
2. Cut the wire tie(s) securing the controller and off-board
charger port cables to the armrest.
3. Flip up the armrest and loosen the setscrew. See figure 13.
4. Slide the controller out of the armrest.
5. Loosen the setscrew in the other armrest.
6. Place the controller in the other armrest.
7. Tighten the setscrew in both armrests.
8. Use a wire tie to secure the controller and off-board
charger port cables to the armrest.
9. Plug the controller and off-board charger port connec-
tors into the power base.
Foot Platform Height Adjustment
To adjust the foot platform height:
1. Remove the hardware from the foot platform bracket.
See figure 14.
2. Move the foot platform up or down to the desired height.
3. Reinstall the hardware into the foot platform bracket
and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the hardware from the foot platform bracket.
See figure 14.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the hardware into the foot platform bracket
and tighten.
Figure 14. Foot Platform Depth
