24
www.pridemobility.com
Jazzy 1113 ATS
I V . D I S A S S E M B L Y A N D A S S E M B L Y
Figure 20. Connect Battery Well Frame
LOCATING PINS
13. Pick up the seat by the frame and set the seat onto the towers
so the holes align with those on the seat towers.
14. Insert the ball detent pin into each seat tower.
15. Match the two tabs at the back of the foot platform mounting
bracket with the two semicircular notches in the vertical bar of
the front frame.
16. Push the tabs through the matching notches.
17. Slide the foot platform down into place.
18. Reconnect the controller harness to its connector on the
electronics tray. See figure 6.
WARNING! Do not place the controller harness
so that it can be pinched in the seat frame or
the power base frame.
Figure 19. Frame Assembly Position
BATTERY WELL FRAME
