Pride Mobility Hurricane SCUK4500, Руководство пользователя

Страница: 30 / 42

30 Hurricane
V I I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
Your Hurricane is equipped with an ergonomically enhanced
pivoting tiller that keeps the console controls at your fingertips
regardless of the tiller angle.
1. Pull up on the tiller adjustment lever. See figure 13.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller remains in the
position you selected.
NOTE: In order to lower the tiller to the Hurricane deck,
you must first remove the seat, rear shroud, and both
batteries. See VIII. “Disassembly and Assembly.”
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of five different heights.
1. Remove the seat from your Hurricane. See VIII. “Disas-
sembly and Assembly.”
2. Use the attached ring to pull and remove the ball detent pin
from the lower seat post. See figure 14.
3. Raise or lower the seat pedestal to the desired seat height.
4. Hold the seat pedestal at that height and match up the holes
in the seat pedestal and in the lower seat post.
5. Fully insert the ball detent pin.
6. Replace the seat.
NOTE: The supplied nut, bolt, and washers can be used as
an alternate to the ball detent pin for seat height adjust-
ment and stability.
FRONT-TO-BACK SEAT ADJUSTMENT
The Hurricane is equipped with a sliding seat that is operated
like an automobile seat. You can reposition the Hurricane’s seat
forward or rearward.
1. Pull out the front-to-back seat release lever. See figure 15.
2. Move the seat forward or rearward.
3. Release the front-to-back seat release lever.
FIGURE 13. TILLER ADJUSTMENT
TILLER
ADJUSTMENT
LEVER
FIGURE 14. SEAT HEIGHT ADJUSTMENT
LOWER SEAT POST
BALL DETENT PIN
SEAT PEDESTAL
ADJUSTMENT HOLES
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the scooter is in motion.