7
Swing-away Footrests
Swing-away footrests (SFRs) enable you to rotate the
footrests to the side before you transfer onto or off of your
power chair.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the adjustment screw(s) from the footrest
extension.
See figure 2 or 3.
2. Slide the footrest up or down to the desired length.
3. Reinstall the adjustment screw(s).
To change foot plate angle:
1. Loosen the hardware on the bottom of the foot plate.
See figure 4.
2. Adjust the foot plate to the desired position.
See figure 4.
3. Tighten the hardware on the bottom of the foot plate.
To adjust the SFR angle when equipped with 60°–90°
SFRs:
1. Remove protective foam cover.
See figure 5.
2. Remove shoulder bolt.
See figure 5.
3. Adjust the SFR to the desired angle.
4. Reinstall the shoulder bolt.
See figure 5.
5. Reinstall the protective foam cover.
Figure 2. Swing-away Footrest Adjustment
Figure 3. Pediatric Footrest Adjustment
Figure 4. Foot Plate Angle Adjustment
SFR Release Lever
Adjustment Screws
Footrest Extension
SFR Release Lever
Adjustment Screw
area (Located on Rear
of Footrest Extension)
Footrest
Extension
Hardware Location
BASIC OPERATION INSTRUCTIONS
