General Description
The Price Wireless Thermostat System provides both sensor
inputs and a point of control for Price controllers.
The System consists of 2 units:
Wireless Remote T-stat
- Transmitter - Room Sensor T-Stat
with dial setpoint adjust, LED and push button.
Wireless Base
- Receiver - Unit with LCD and 3 push buttons.
Remote T-stat and Base units talk between each other
wirelessly in the 2.4GHz range (FCC and IC certified). Base unit
connects to main controller using the supplied plenum-rated
CAT-5 cable. No other connections are required.
NOTE
:
Make sure that dip switches on the back of remote
and base are in the same positions, but also are unique from
other wireless pairs in the building. This prevents collisions and
incorrect data.
The
Base LCD
displays the data received from Remote
T-Stat: dial setpoint, current temperature, received message
strength (in percent) and battery condition. Battery condition
is code from 1 to 5, which signifies the amount of battery life
left in remoteT-stat (Transmitter). The battery code 0 signifies
that there is no signal from Remote T-stat: it is either dead
(batteries are low) or out of range. Remote T-stat transmits data
to the base approximately every 2 mins, or when the button is
pushed. LED provides data about transmission:
Green - Good operation
Amber - Battery
low
operation
Red - Remote T-stat cannot transmit
When the button is pushed to trigger transmission, the LED will
stay on longer for the user to see.
NOTE 1:
Remote T-stat (Transmitter) is using Ultimate Lithium
Energizer L91 Batteries. Please replace batteries with the
same L91, when remote T-stat LED is Red or Amber, or base
(Receiver) stops getting messages.
NOTE 2:
Batteries must be Lithium type. Standard alkaline
batteries do not supply enough voltage to ensure proper
transmission. Also alkaline battery life is much shorter than
lithium type batteries.
Set channel and address dip switches the same to match
a Remote T-stat and Base pair.
WARNING:
Ensure they are unique within your building.
1
ON
2
3
4
1
2
3
4 5
6
7
8
ON
1
ON
2
3
4
1
2
3
4 5
6
7
8
ON
Channel
Channel
Address
Address
1
ON
2
3
4
1
2
3
4 5
6
7
8
ON
1
ON
2
3
4
1
2
3
4 5
6
7
8
ON
Channel
Channel
Address
Address
BASE (RECEIVER) MOUNTED IN PLENUM
REMOTE (TRANSMITTER) USER THERMOSTAT
1
PRICE WIRELESS THERMOSTAT SYSTEM - Manual
|
priceindustries.com
PRICE WIRELESS THERMOSTAT STSEM
PRODUCT OVERVIEW
