background image

1

PRICE INTELLIGENT CONTROLLER WITH LCD THERMOSTAT - Manual 

  |   

priceindustries.com

PRICE INTELLIGENT CONTROLLER WITH LCD THERMOSTAT

AIR BALANCING GUIDE

Support: 

Having difficulty installing or configuring this product? Price is here to help.

Controls Application Support: 

204.654.5613  |  [email protected]  |  priceindustries.com/resources/type/literature

Instructions

For more advanced setup details, please refer to the PIC Installation and Service Manual on www.priceindustries.com.

Hold down the 

Menu

 button on the LCD Thermostat for  

5 seconds

 until prompted for a passcode; use   and    

to enter the passcode; 

DOWN, UP, UP, DOWN

.

The screen will now display “Service Menu: Application.”

Scroll down to the Balancing sub-menu.

Press the 

Menu

 button to enter this menu.

Screen will now show “Damper Override Disabled.” Press 

Menu

, and now “Disabled” will be flashing; this means you can 

now scroll 

UP

 or 

DOWN

 with the arrow keys to select a target 

to send the damper to.

For most applications, you will want to select “Go To Cool 
Max,” and once selected, the thermostat will read the actual 
CFM (position) and target CFM as the damper tries to lock on 
to the cooling max airflow. 

NOTE:

 

If the target is zero, airflows must be entered in the 

VAV sub-menu – refer to the PIC Installation and Service 
Manual on www.priceindustries.com.

5 SECONDS

THEN

SERVICE MENU:

APPLICATION

THEN

SERVICE MENU:

BALANCING

THEN

DPR OVVERIDE:

GOTO COOL MAX

POS. TARGET

120CFM 

250 CFM

DPR. OVERRIDE:

DISABLED

THEN

Another option to override the damper is the “Flow Override” function. This will cause the damper to target any specific airflow that 
may not be a cooling or heating min/max flow.

THEN

FLOW OVERRIDE

NO OVERRIDE

THEN

FLOW OVERRIDE

NO OVERRIDE

POS. TARGET

120CFM 

200 CFM

When the screen is displaying “Flow Override,” press the 

Menu

 button and “No Override” will begin flashing. Press the 

UP

 arrow key to select a CFM value for the damper to target. 

Press 

Menu

 to select the value and press the 

DOWN

 arrow 

key to view the damper position vs target screen. The position 
should increase steadily until the target is reached.

NOTE:

 

“Flow Override” must be set back down to “No 

Override” once complete.

Once the thermostat says that the position and target are the same, an airflow reading can now be taken from the air outlets. 
Compare your instrument’s reading to what the thermostat is reading for an airflow. Some adjustment may be required. 
Adjustments are made in the ‘Airflow Factor’ menu, or, depending on the version of the controller, the ‘Airflow Tweak’ menu.

Отзывы: