8
9
10
11
12
13
4 HOLE WITH DECKPLATE INSTALLATION
8 DECKPLATE INSTALLATION
Ensure that Plastic Putty Plate (
8A
) is pressed onto Deckplate (
8B
). Place a
bead of plumber’s putty in the groove along the outer edge of Putty Plate (
8A
).
If desired, place a small bead of plumber’s putty to the underside of Hose Guide
&
8D
). Insert Hose Guide (
8C
#$%&
8D
) and onto
the sink hole. Install Deckplate (
8B
) over the holes in the sink.
9 SECURING DECKPLATE & HOSE GUIDE
*+ $%&
9A
) by screwing Plastic Locknut
(
9B
#1 2 *&
9C
) by screwing Wing Nuts (
9D
) to Mounting Posts
(
9E
). Hand tighten.
Caution: do not over-tighten.
Remove any excess putty
from around the outside edge of Deckplate (
9C
).
10 SIDE SPRAY INSTALLATION
0$&
10A
) through Hose Guide (
10B
#1
*+$&
10A
) back up through the center hole of sink and
through Deckplate (
10C
) so that it is above the sink.
Go To Step 15
STOP
3 HOLE WITH SINGLE POST & SOAP
DISPENSER INSTALLATION
11 MOUNTING RING & GUIDE FLANGE & SOAP
DISPENSER SHANK INSTALLATION
Insert Hose Guide (
11A
#$%&
11B
#+2
*&
11C
#%*&
11D
) and place Mounting Ring (
11E
) over
Plastic Gasket (
11F
) and into the sink holes. If desired, place a small bead
'$%&
11B
). Ensure that
Mounting Ring (
11E
#&
11G
) parallel with the outer sink holes.
12 SECURING HOSE GUIDE & SOAP DISPENSER SHANK
*+ $%&
12A
#2*
(
12B
) by screwing Plastic Locknuts (
12C
) and (
12D
). Hand tighten.
Caution: do not over-tighten.
13 SOAP DISPENSER INSTALLATION
*+3&
13A
#*&
13B
). Pour in liquid
& #*4 &
13C
). Insert Pump Mechanism (
13D
)
into soap dispenser body. Install Dispenser Head (
13E
#
dispenser mechanism.
;
ENGLISH
ENGLISH
8A
8B
8C
'<
BOTTOM GROVE
&&<
9B
12B
9A
9E
<
9C
10A
10C
10B
11C
11F
11E
11G
11A
11B
&*?
12A
12C
&<
&*<
&*@
&*
&*D
