5
www.holyoakepureair.com | Room AIR PuRIfIeR - manual
Room AiR PuRifieR
filter Replacement
Step 1:
Gain access to the unit by removing one of the side
access panels.
Step 2:
Remove filter by pulling on the frame to slide it out
from under the brackets.
Step 3:
Replace with a new filter.
NoTe:
Recommended filter life for the MERV8 Pre-Filter is 4,000
hours. Recommended filter life for the HEPA Filter is 20,000
hours. Filter life is variable based on airflow set point, and air
quality.
motor/Blower field Replacement
Tools you will need to replace the motor/blower assembly in
the field:
• 3/8 inch (9.5mm) nut driver bit.
• Wiring diagram (located inside the control panel).
Recommended, but not required:
• Right-angle attachment for drill.
• 12 inch (300mm) Drill bit extension.
Removal Instructions:
1. Disconnect all power to the unit.
2. Remove access panel on either side of the unit.
3. Remove the screw attaching the power and control cables
to the side of the blower. Once that is complete, unplug
the power and control wires from the motor (Figure 1).
4. Remove the 3/8 inch (9.5mm) bolts connecting the blower
to the discharge plate.
THe PRiCe HoLYoAKe RAP
SiDe ACCeSS PANeLS RemoVeD
meRV8 AND HePA fiLTeR CHANGe
SERVICE INSTRUCTIONS
