PRG VARI LITE VL5, Руководство по обслуживанию

Страница: 44 / 142

34 VL5 ™ WASH LUMINAIRE SERVICE MANUAL
Color Filter and Diffuser/Douser Panel Replacement
Parts:
22.9634.0123 1 EA ASSY, VL5 SWP FILTER (BLUE) *
22.9634.0124 1 EA ASSY, VL5 LWP FILTER (AMBER) **
22.9634.0126 1 EA ASSY, VL5 DIFFUSER PANEL
22.9634.1183 1 EA ASSY, VL5B FILTER SWP (BLUE)
22.9634.1185 1 EA ASSY, VL5B FILTER CCF (MAGENTA)
22.9647.0074 1 EA ASSY, CCF FILTER (MAGENTA)
22.9647.0136 1 EA ASSY, DIMMER BLADE, VL5A
* 22.9661.0323, used in the VL2416 wash luminaire, may be substituted.
** 22.9661.0324, used in the VL2416 wash luminaire, may be substituted.
Tools:
Cotton gloves or finger cots
Screwdriver, tweaker
To remove and replace a color filter or diffuser/dimmer panel:
Step 1. Ensure filter and diffuser/dimmer panels are in open position.
WARNING: All maintenance procedures are to be performed with power removed from luminaire.
Step 2. Disconnect luminaire AC input cable from power source.
Step 3. Unlatch and swing open heatsink assembly and front lens ring. Figure 2-6.
Step 4. Remove top and bottom head covers.
Step 5. Determine whether drive ring pin is missing from an inner or outer filter set. Figure 2-19.
a. Position luminaire, with heatsink or front ring assembly swung open to access an outer filter set.
b. Separate bulkheads to access inner filter sets. Refer to "Separating Front and Rear Bulkheads" on
page 32 , as necessary.
c. If any drive ring pins are missing, replace pins. Refer to "Drive Ring Pin Replacement" on page 36 .
Figure 2-19: Inner and Outer Filter Set Locations
Front Bulkhead
Rear Bulkhead
Inner Filter Sets
Outer Filter Set
Outer Filter Set