PRG SUPER NODE 20.9821.0001, Руководство пользователя

Страница: 15 / 26

SUPER NODE™ USER MANUAL
13
Step 2. Using Menu Display controls, set Super Node thumbwheel address (refer to "Menu Controls" on page 15).
Ensure that addresses are unique among all Nodes in system.
Vx76 Console Setup
When using a Super Node with a PRG Vx76 console, the Node can be set up using the console’s DMX Setup window.
Step 1. At Setup menu, select DMX Setup . (DMX Setup window will open.
)
Step 2. Select desired DMX Universe.
Step 3. Enable Patch Edit by pressing Patch Edit button at bottom of window.
Step 4. Select "Super Node" from DMX Host menu.
Step 5. Enter Node thumbwheel address in "Thumb" field.
Step 6. Choose "Port" output.
Step 7. If assigning multiple universes, click Next or press [Enter] to edit the next
universe. Otherwise, select Disable Edit to disable patch edit and save changes.
Note: If patching sequential Nodes and outputs, pressing the [Return] button on the
keyboard will auto increment the patch. If not sequential, repeat Steps 4 through 6.
Troubleshooting
Symptom Indication Remedy
Super Node online,
but no control. Appears in console configuration
window, but channels are not online. Verify Super Node address and that universes are set to
"Super Node" not "Console" or "Node" in DMX Setup window.
Node Address
Advance Button -
Press to enter current settings
and advance to the next line
Enable/Disable
DMX Output of Node
DMX Universe (A-ZZ)
Must be assigned to a
DMX Host (Node, etc.)
DMX512 channel
assignments for
selected universe
Orange highlights
show DMX channel
range for selected
fixtures
Patch Editing
DMX Output Rate
Port #
Host Device