UNPACKING
7
When unpacking the box, do not discard any packing materials until
all of the contents are accounted for:
• Self-Leveling Cross Line Laser Tool
• Magnetic mounting bracket
• bag
• 3 x AA alkaline batteries
• Operator’s manual
Carefully lift the compact laser measuring tool out of the package and place it on a
stable, flat surface.
BATTERIES AND POWER
INSERTING/REPLACING THE BATTERY
AA alkaline batteries are recommended for the measuring tool.
To open the battery compartment lid, press the latch and open it. Insert
the batteries provided. Pay attention to the correct
polarity of the batteries according to the
representation on the metal plate inside the lid.
Always replace all batteries at the same time.
Only use batteries from one brand and with
the identical capacity.
NOTE:
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the batteries
can corrode and discharge themselves.
SET UP
Laser Tool
• Place laser tool on a flat, stable surface.
Mounting on Accessories
• Position accessory in a place where it will not be easily disturbed and near the
central location of the area to be measured.
• Set up the accessory as required. Adjust positioning to be sure that the accessory
base is near horizontal (within laser tools compensation range).
• Mount the laser tool to the accessory by using the appropriate fastening method. At
the bottom of the tool, a 1/4"-20 nut is located. Mount the tool to accessories like
magnetic mounting bracket or tripod (not included) by assembling the tool nut with
the 1/4"-20 screw on the accessories. With the accessories, the tool can work
under various applications which makes jobs done easier.
