PREVOST X3-45 VIP 2017, Руководство пользователя

Страница: 122 / 212

Other Features 5-36
PROBLEM CAUSE CORRECTIVE ACTION
Top of slide-
out moves
sideways when
vehicle is
moving Roof reinforcing rod misadjusted; Readjust as per procedure.
Slide-out does
not retract up
to its full "in"
position Interference between the exterior extrusion and the
vehicle upper horizontal member above the slide-
out; A. Check for straightness of horizontal
member and adjust the roof
reinforcing rod.
B. Check for outer wiper seal lip
straightness on the slide-out roof.
Bottom of
slide-out not
flush with
vehicle body A. Broken or misadjusted lower "in limit" stopper;
B. Lower "in limit" stoppers are not leaning
against the structure at the moment when the
"in limit" sensor detects the magnet;
C. Acetal plastic block serving as leaning surface
for lower "in limit" stopper broken or moved;
A. Replace or adjust lower "in limit"
stopper.
B. Adjust the sensor position in order to
have contact of the stoppers against
the structure when slide-out is
stopped.
C. Replace or adjust acetal plastic block
proper position.
Top of slide-
out not flush
with vehicle
body A. Broken or misadjusted leveling or retaining
screw;
B. Faulty upper “in limit" stopper;
A. Check and replace screw.
B. Replace upper “in limit" stopper.
Lower edge of
slide-out not
parallel with
vehicle body
opening Faulty leveling and retaining screw (8 screws on
each side). Inspect screws, replace and adjust slide-
out level.
Watertightness
problem A. Inflatable seal and/or wiper seal damaged or
unstuck;
B. Insufficient air pressure in the seal;
C. No air pressure in the slide-out pneumatic
system;
D. Sealant missing;
E. Wiper seal draining hole clogged;
F. Faulty water recovery pan;
G. Faulty internal gutter;
A. Check both seals condition.
B. Check the pressure regulator, the
relieving shut-off valve and the seal
valve condition.
C. Check the slide-out air pressure inlet
valve condition and the accessory air
tank pressure.
D. Check the exterior extrusion screws,
the windows and the exterior panels
sealant condition.
E. Unclog draining hole.
F. Check the recovery pan.
G. Check internal gutter.
Knocking
sound at end
of travel when
extending
slide-out Inner stoppers misadjusted; Readjust the inner stoppers.